CF Multi-pin Military Watch Lead-in Flange “Mil-Spec”
Multi-pin Military Watch Lead-in Flange
Multi-Pin Mil-Spec Feedthroughs (MS); Commonly referred to as “Mil-Spec”
Voltage (V): 700
Current (A): 10/PIN
Number of Conductors: 4; 6; 10; 20; 35
Conductor Material: Aluminum
Insulator Material: Alumina Ceramic
Flange Installation: CF16; CF35; CF63
Vacuum Degree: 1×10⁻¹⁰ Torr
CF Metal Seal: -200°C to 450°C
Maximum Heating Rate: 25°C per minute
Both 2D and 3D models are available. Non-standard customization is accepted. If you have any requirements, you can consult our sales engineers. It complies with the MIL-C-5015 electrical connector core spectrum standard (MIL-C-5015 standard).
Remarks:
The marked technical parameters are subject to various conditions, such as material properties, mechanical design, and operating environment. All electrical ratings are based on the operation with one side in a dry atmospheric environment and the other side in a vacuum environment of less than 1×10⁻⁴ Torr. All 3D models and any dimensions shown or listed in our catalog do not include manufacturing tolerances and are for reference only.
Multi-Pin Mil-Spec Feedthroughs (MS); Commonly referred to as “Mil-Spec”
Voltage (V): 700
Current (A): 10/PIN
Number of Conductors: 4; 6; 10; 20; 35
Conductor Material: Aluminum
Insulator Material: Alumina Ceramic
Flange Installation: CF16; CF35; CF63
Vacuum Degree: 1×10⁻¹⁰ Torr
CF Metal Seal: -200°C to 450°C
Maximum Heating Rate: 25°C per minute
Both 2D and 3D models are available. Non-standard customization is accepted. If you have any requirements, you can consult our sales engineers. It complies with the MIL-C-5015 electrical connector core spectrum standard (MIL-C-5015 standard).
Remarks:
The marked technical parameters are subject to various conditions, such as material properties, mechanical design, and operating environment. All electrical ratings are based on the operation with one side in a dry atmospheric environment and the other side in a vacuum environment of less than 1×10⁻⁴ Torr. All 3D models and any dimensions shown or listed in our catalog do not include manufacturing tolerances and are for reference only.
- Size parameters
- Product Features
