KF Multi-pin Type D Lead-in Flange Multi-Pin Sub-D Type Feedthroughs (MPDT) These multi-pin instrument lead-ins have a circular bayonet locking connector on the air side and crimp pins on the vacuum side. Voltage (V): 500 Current (A): 5/PIN Number of Conductors: 3; 6; 10; 19; 32; 41; Conductor Material: Gold-plated stainless steel Insulator Material: Glass-ceramics Flange Installation: KF40; KF50; ISO63; ISO100 Vacuum Degree: High vacuum; Ultra-high vacuum CF Metal Seal: -40°C to 200°C Maximum Heating Rate: 25°C per minute It complies with the MIL-C-24308 electrical connector core spectrum standard. Both 2D and 3D models are available. Non-standard customization is accepted. If you have any requirements, you can consult our sales engineers. Remarks: The marked technical parameters are subject to various conditions, such as material properties, mechanical design, and operating environment. All electrical ratings are based on the operation with one side in a dry atmospheric environment and the other side in a vacuum environment of less than 1×10⁻⁴ Torr. All 3D models and any dimensions shown or listed in our catalog do not include manufacturing tolerances and are for reference only.
Size parameters
Product Features
KF多针D型引线法兰
Multi-Pin Sub-D Type Feedthroughs (MPDT)
这些多针仪器引线在空气侧具有圆形卡口锁定连接器，在真空侧具有压接销。
电压(V):500
电流(A):5/PIN
导体数量:3;6;10;19;32;41;
导体材质:镀金不锈钢
绝缘体材料:微晶玻璃
法兰安装：KF40;KF50;ISO63;ISO100
真空度:高真空；超高真空
CF金属密封：-40°C 至200°C
最高升温频率:25℃/分钟
符合MIL-C-24308电连接器芯谱标准
可提供2D\3D模型，接受非标定制，如有需求可咨询销售工程师。
备注:
标注的技术相关参数会受到各种条件制约，如材料特性、机械设计操作环境等。
所有电气额定值均基于一侧在干燥大气环境中，另一侧在＜ 1 x 10 -4 Torr 的真空环境中运行。
