It is designed for the signal transmission of vacuum equipment and instruments. This product features double-ended BNC connectors with grounded shielding and embedded conductors. Voltage (V): 500; 2500 Current (A): 3 CF metal seal temperature range: -269°C to 450°C Maximum heating rate: 25°C per minute Cable connector temperature range: -65°C to 165°C Number of conductors: Optional 1 or 4 Conductor material: Stainless steel Impedance: 48 - 52 ohms Flange installation: CF16, CF35, CF50, CF63 Insulator material: Alumina Both 2D and 3D models are available. Non-standard customization is accepted. If you have any requirements, you can consult our sales engineers. Remarks: The marked technical parameters are subject to various conditions, such as material properties, mechanical design, and operating environment. All electrical ratings are based on the operation with one side in a dry atmospheric environment and the other side in a vacuum environment with a pressure of less than 1 x 10⁻⁴ Torr. All 3D models and any dimensions shown or listed in our catalog do not include manufacturing tolerances and are for reference only.
Size parameters
Product Features
CF法兰双端BNC同轴接头
设计用于真空设备仪器信号的传输
双端 BNC 型连接器，接地屏蔽，嵌入式导体
电压(V):500;2500
电流(A):3
CF金属密封温度范围：-269°C 至 450°C
最高升温频率:25℃/分钟
电缆连接器温度范围：-65°C 至 165°C
导体数量：1；4可选
导体材料：不锈钢
阻抗：48-52 欧姆
法兰安装：CF16;CF35；CF50;CF63
绝缘体材料：氧化铝
可提供2D\3D模型，接受非标定制，如有需求可咨询销售工程师。
备注:
标注的技术相关参数会受到各种条件制约，如材料特性、机械设计操作环境等。
所有电气额定值均基于一侧在干燥大气环境中，另一侧在＜ 1 x 10 -4 Torr 的真空环境中运行。
